mirror of
https://github.com/c-sooyoung/fold_slice.git
synced 2026-09-17 20:39:08 +09:00
initial commit
This commit is contained in:
@@ -0,0 +1,123 @@
|
||||
% full_array = add_to_3D_projection(small_array,full_array, positions_offset, indices,add_values, add_atomic, use_MEX)
|
||||
% add one small 3D block into a large 3D array with offset given by
|
||||
% positions_offset vector and perform this operation only for slices selected by
|
||||
% indiced vector
|
||||
%
|
||||
% Inputs:
|
||||
% **full_array - array to which the small_array will be added / written
|
||||
% **small_array - array used to be added to large array
|
||||
% **positions_offset - [Nangles x 2] offset from (1,1) coordinate in pixels
|
||||
% for each slice , if provide only [1x2] vector, assume the same
|
||||
% offset for each slice
|
||||
% **indices - add only to selected sliced of the full_array
|
||||
% *optional*
|
||||
% **add_values - (default==true) add values instead of rewritting
|
||||
% **add_atomic - (default==true) add values in atomic way, slow but it allows overlapping regions
|
||||
% **use_MEX - (use_MEX==true) use fast mex code
|
||||
% *returns*
|
||||
% ++full_array or none, results were writted !directly! to the input
|
||||
% array full_array, there is not need to take any output if MEX
|
||||
% function add_to_3D_projection was used
|
||||
%
|
||||
% Compilation from Matlab:
|
||||
% mex -R2018a 'CFLAGS="\$CFLAGS -fopenmp"' LDFLAGS="\$LDFLAGS -fopenmp" add_to_3D_projection_mex.cpp
|
||||
% Usage from Matlab:
|
||||
%
|
||||
% full_array = (rand(1000, 1000, 200, 'single'));
|
||||
% small_array = (zeros(500, 500, 100, 'single'));
|
||||
%
|
||||
% positions_offset = (10*rand(100,2));
|
||||
% indices = ([1:100]); % indices are starting from 1 !!
|
||||
% add_values = true;
|
||||
% add_to_3D_projection(small_array,full_array,positions_offset, indices,add_values);
|
||||
|
||||
|
||||
|
||||
% *-----------------------------------------------------------------------*
|
||||
% | |
|
||||
% | Except where otherwise noted, this work is licensed under a |
|
||||
% | Creative Commons Attribution-NonCommercial-ShareAlike 4.0 |
|
||||
% | International (CC BY-NC-SA 4.0) license. |
|
||||
% | |
|
||||
% | Copyright (c) 2017 by Paul Scherrer Institute (http://www.psi.ch) |
|
||||
% | |
|
||||
% | Author: CXS group, PSI |
|
||||
% *-----------------------------------------------------------------------*
|
||||
% You may use this code with the following provisions:
|
||||
%
|
||||
% If the code is fully or partially redistributed, or rewritten in another
|
||||
% computing language this notice should be included in the redistribution.
|
||||
%
|
||||
% If this code, or subfunctions or parts of it, is used for research in a
|
||||
% publication or if it is fully or partially rewritten for another
|
||||
% computing language the authors and institution should be acknowledged
|
||||
% in written form in the publication: “Data processing was carried out
|
||||
% using the “cSAXS matlab package” developed by the CXS group,
|
||||
% Paul Scherrer Institut, Switzerland.”
|
||||
% Variations on the latter text can be incorporated upon discussion with
|
||||
% the CXS group if needed to more specifically reflect the use of the package
|
||||
% for the published work.
|
||||
%
|
||||
% A publication that focuses on describing features, or parameters, that
|
||||
% are already existing in the code should be first discussed with the
|
||||
% authors.
|
||||
%
|
||||
% This code and subroutines are part of a continuous development, they
|
||||
% are provided “as they are” without guarantees or liability on part
|
||||
% of PSI or the authors. It is the user responsibility to ensure its
|
||||
% proper use and the correctness of the results.
|
||||
%
|
||||
%
|
||||
|
||||
function full_array = add_to_3D_projection(small_array,full_array, positions_offset, indices,add_values, add_atomic, use_MEX)
|
||||
|
||||
if nargin < 7
|
||||
use_MEX = true;
|
||||
end
|
||||
if nargin < 6
|
||||
add_atomic = true;
|
||||
end
|
||||
if nargin < 5
|
||||
add_values = true;
|
||||
end
|
||||
if size(positions_offset,1)==1
|
||||
positions_offset = repmat(positions_offset, numel(indices), 1);
|
||||
end
|
||||
if use_MEX && ~isa(full_array, 'gpuArray') && ~verLessThan('matlab', '9.4') && ~islogical(small_array) % logical arrays not yet implemented
|
||||
%% run fast MEX-based code if possible
|
||||
try
|
||||
add_to_3D_projection_mex(small_array,full_array, int32(positions_offset), int32(indices),add_values>0,add_atomic>0);
|
||||
catch err
|
||||
% recompile the scripts if needed
|
||||
if any(strcmp(err.identifier, { 'MATLAB:UndefinedFunction','MATLAB:mex:ErrInvalidMEXFile'}))
|
||||
utils.verbose(0, 'Recompilation of MEX functions ... ')
|
||||
path = replace(mfilename('fullpath'), mfilename, '');
|
||||
mex('-R2018a','-O', 'CFLAGS="\$CFLAGS -fopenmp"', '-O','LDFLAGS="\$LDFLAGS -fopenmp"',[path,'private/add_to_3D_projection_mex.cpp'], '-output', [path, 'private/add_to_3D_projection_mex'])
|
||||
add_to_3D_projection_mex(small_array,full_array, int32(positions_offset), int32(indices),add_values>0,add_atomic>0);
|
||||
else
|
||||
rethrow(err)
|
||||
end
|
||||
end
|
||||
return
|
||||
end
|
||||
|
||||
%% matlab alternative to the MEX file , (much slower)
|
||||
positions_offset = round(positions_offset);
|
||||
N_f = size(full_array);
|
||||
N_s = size(small_array);
|
||||
|
||||
for ii = 1:size(positions_offset,1)
|
||||
jj = min(indices(ii),size(full_array,3));
|
||||
for i = 1:2
|
||||
ind_f{i} = max(1, 1+positions_offset(ii,i)):min(N_f(i),positions_offset(ii,i)+N_s(i));
|
||||
ind_s{i} = ((ind_f{i}(1)-positions_offset(ii,i))):(ind_f{i}(end)-positions_offset(ii,i));
|
||||
end
|
||||
if add_values
|
||||
full_array(ind_f{:},jj) = full_array(ind_f{:},jj) + small_array(ind_s{:},min(ii, size(small_array,3)));
|
||||
else
|
||||
full_array(ind_f{:},jj) = small_array(ind_s{:},min(ii, size(small_array,3)));
|
||||
end
|
||||
end
|
||||
|
||||
end
|
||||
|
||||
Reference in New Issue
Block a user